1950 B2D 126 Dually
Front View
Rare factory dually setup on 9 foot bed. Note the optional brush guard and fender mounted turn signals. This option required the 1 ton full floater rear axle and special hubs with larger wheel studs. Special Budd rims were used that had alternating "dished" lug nut holes. The dishes rims would lock together and bolt on with standard lug nuts. No additional wheel spacers were used.
Rear View
A smaller "extension"fender, approximately 6 inches wide, was bolted inside the standard fender to increase the width.
Extension
Small running board extensions were bolted to the front of the widened fender.
Profile
Great profile !
Reference Info, S/N and Model IDs
This page is for entertainment only and neither the author nor the webmaster is responsible for any consequence resulting from the use or misuse of this information, or from any errors, omissions, or inaccuracies within. Copyright 2004 - 2001 G.T. Koldjeski